Ceiling Installation - Optoma TX779 Manual

Damage to the
v
projector as a
result of
incorrect
installation
voids the
warranty.
Ensure at least
v
10cm clear-
ance between
the ceiling and
the underside
of the projector.
Avoid locating
v
the projector
near heat
sources
such as air
conditioning
and heaters.
Excess heat
may cause the
projector to
power off.
Downloaded From projector-manual.com Optoma Manuals

Ceiling Installation

To prevent damage to your projector please use the recommended
mounting package for installation.
To ensure compliance, only use a UL Listed ceiling mount and
screws that meet the following specifications:
Screw Type: M4
4
Maximum screw length: 11 mm
4
Minimum screw length: 9 mm
4
Refer to the following diagram to ceiling mount the projector.
Appendices
English