Konica Minolta magicolor 2590MF User Manual page 201

Solving Problems with Printing Quality
Downloaded From ManualsPrinter.com Manuals
Symptom Cause
Irregular The media is moist
print or mot- from humidity.
tled image
appears.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
One or more of the
toner cartridges may
be defective.
The drum cartridge is
defective.
The fuser separator
levers are adjusted
for envelope printing.
There is The media is moist
insufficient from humidity.
fusing or the
Unsupported media
image
(wrong size, thick-
comes off
ness, type, etc.) is
when
being used.
rubbed.
Media type is set
incorrectly.
The fuser separator
levers are adjusted
for envelope printing.
Solution
Adjust the humidity in the media stor-
age area.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA-approved
media. See "Specifications" on page
40.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
Remove the toner cartridges and
check for damage. If it is damaged,
replace it.
Remove the drum cartridge and check
for damage. If it is damaged, replace it.
Return the fuser separator levers to the
plain paper setting.
Remove the moist media and replace it
with new, dry media.
Use KONICA MINOLTA-approved
media. See "Specifications" on page
40.
Also, refer to http://printer. konicami-
nolta.com for a complete list of cur-
rently approved media.
When printing envelopes, labels, post-
cards, thick stock, or transparencies,
specify the appropriate media type in
the printer driver.
Return the fuser separator levers to the
plain paper setting.
187