Other Convenient Features; Repeat Cook; Information With Error Messages - Sharp R-22AM Operation Manuall

As the time to be set increases, the timer steps in larger increments (units), as shown on the table below. Ex.
for R-22AM/23AM: If a time between 0 - 60 seconds is entered, the cooking time will increase in 2 second
steps, whereas if the time is between 10 - 30 minutes each step will be a 30 second increment.
COOKING TIME SETTING UNIT
(For R-22AM/23AM)
COOK TIME
0 - 60 seconds
60 seconds - 3 minutes
3 - 10 minutes
10 - 30 minutes

OTHER CONVENIENT FEATURES

REPEAT COOK

Your oven can memorize the last cooking time in each power level. If you use this function, you have no need
to enter the cooking time.
Example: Suppose you want to use this function at 100%. (The last cooking time is 10 min.).
/100%
Choose desired
power level
(100%).

INFORMATION WITH ERROR MESSAGES

If ERROR messages are displayed, follow the below instructions.
ERROR MASSAGES
Please contact your dealer or an authorized Sharp service agent because the oven
EE1,EE2,EE3,
must be out of order.
EE6,EE10,EE16
EE8,EE0
(For R-22AM/23AM)
EE19
(For R-25AM)
Exhaust air temperature is too high. Checking that nothing is blocking the ventilation
EE7
openings or that room temperature is very hot or that oven cavity is empty during
operation. Correct and try again after a few minutes.
Magnetron temperature is too high, open and close the door twice, and then try again
EE17
after a few minutes.
The time you set exceeds a maximum time. Open and close the door twice, and
EE9
enter appropriate time.
(For R-25AM)
UNIT
2 seconds
5 seconds
10 seconds
30 seconds
POWER
%
Check the display.
GB-8
(For R-25AM)
COOK TIME
0 - 20 seconds
20 seconds - 1 minute
1 - 6 minutes
6 - 15 minutes
15 - 30 minutes
Start to cook.
UNIT
2 seconds
5 seconds
10 seconds
30 seconds
1 minute
POWER
%
ON
Check the display.