Installing The Recoil-Starter Rope In The Rope Guide; Filling The Engine With Oil - Toro Recycler 20334 Operator's Manual

1. Handle knob
5. Loosely install the handle knobs onto the carriage bolts.
6. Refer to steps 3 through 5 of
Height (page 9).
2
Installing the Recoil-Starter
Rope in the Rope Guide
No Parts Required
Procedure
Important: To start the engine safely and easily
whenever you use the machine, install the recoil-starter
rope in the rope guide.
Hold the blade-control bar to the upper handle and pull the
recoil-starter rope through the rope guide on the handle
(Figure 7).
1. Recoil-starter rope
Figure 6
2. Carriage bolt
Adjusting the Handle
Figure 7
2. Rope guide
3

Filling the Engine with Oil

No Parts Required
Procedure
Note: Your machine does not come with oil in the engine,
but it does come with a bottle of oil.
Max. fill: 0.53 L (18 oz), type: SAE 30 detergent oil with an
API service classification of SF, SG, SH, SJ, SL, or higher.
1. Remove the dipstick
1. Dipstick
2. Add marker
2. Slowly pour oil into the oil-fill tube until the oil level
reaches the Full line on the dipstick
overfill.
3. Install the dipstick securely.
6
(Figure 8).
Figure 8
3. Full marker
(Figure 8). Do not