Identification And Ordering - Toro 09801 Operator's Manual

Fluid Specifications
Fuel—Unleaded regular gasoline recommended to minimize
engine intake valve and combustion chamber deposits.
Engine Oil—Service classification API SF, SG, SF/CC or
SG/CC in a 30 weight viscosity grade.
Engine Oil Filter—Toro part no. 57-8530
Hydraulic Oil—Mobil DTE 26 or other interchangeable
equivalent. See chart below for equivalent oils.
Mobil
Shell
Amoco
Conoco
Exxon
Kendall
Pennzoil
Phillips
Standard
Sun
Union
Hydraulic Oil Filter—Toro part no. 67-8110
Water Pump Case Oil—Mobil DTE Extra Heavy or other
interchangeable ISO Grade 150 PE-700-A (Heavy
Inhibited Hydraulic & General Purpose) See following
chart for equivalent oils.

Identification and Ordering

MODEL AND SERIAL NUMBERS
The HYDROJECT 3000 has two identification numbers: a
model number and a serial number. The two numbers are
stamped on a plate which is riveted to the frame. In any
correspondence concerning the HYDROJECT 3000, sup-
ply model and serial numbers to be sure that correct infor-
mation and replacement parts are obtained.
To order replacement parts from an authorized TORO
Distributor, supply the following information:
1. Model and serial numbers of the machine.
DTE 26
Tellus 68
Rykon Oil #68
Super Hydraulic Oil 68
Nuto H 68
Kenoil R&O 68
Penreco 68
Magnus A 68
Energol HLP 68
Sunvis 831 WR
Unax AW 68
Mobil
Shell
Amoco
Chevron
Conoco
Exxon
Kendall
Pennzoil
Phillips
Standard
Sun
Union
Valvoline
Water Supply—Recommend a source with 26.5–30.2 l
per minute. A minimum pressure of 207 kPa at the
machine is required for the pump to engage.
Maximum allowable pressure of 1,379 kPa.
Although irrigation water pumped from ponds or
effluent holding pools can be used, not all condi-
tions can be handled by the machine's filtration sys-
tem. Additional or alternative filtration may be
required.
Water Filter Cartridge—Toro part no. 86-8630
DO NOT USE CHEMICALS—Concern for environ-
mental issues and corrosive affects on machine
components.
2. Part number, description and quantity of parts
desired.
Note: Do not order by reference number if a parts
catalog is being used; use the part number.
DTE EH (Extra Heavy)
Turbo 150
American Ind. Oil 150
AW Machine Oil 150
Dectol R & O150
Terresstic 150
Ken-Tran 080
Penreco 150/AW150
Magnus Oil 150
Energol HLP 150
Sunvis 150
Unax RX 150/Turbine Oil 150
ETC (R&O) #70
11