Pioneer CDJ-2000nexus Connection Manual page 5

Using CDJ/XDJ
as TRAKTOR Series Controllers
Switch on the power to all units once the connections have been made. Then, set up the CDJ/XDJ in
accordance with the following procedures.
[LINK] button
1
When using either the CDJ-2000 or CDJ-900, press and hold the [MENU] button for at least one
second to enter the [UTILITY] mode. Select [ADVANCED] for the [HID SETTING] using the rotary
selector and then press [MENU] button to exit [UTILITY] mode.
This action is not required when using the CDJ-2000nexus, CDJ-900nexus and XDJ-1000.
2
Press the [LINK] button on the CDJ/XDJ and then select [USB MIDI] for the [CONTROL MODE]. Press
the rotary selector to set the parameter. The CDJ/XDJ is now recognized by the TRAKTOR series.
3
When [Turn SELECTOR to choose TRAKTOR deck] is displayed on the CDJ/XDJ's main display area,
rotate the rotary selector to select the deck to be controlled from A to D. The parameters are set by
pressing the rotary selector.
As described above, the TRAKTOR series can now be controlled by the CDJ/XDJ.
5
[MENU] button
ROTARY SELECTOR