1120 System Board And Fan Assembly - Lenovo ThinkPad Edge E30 Hardware Maintenance Manual

1120 System board and fan assembly

Important notices for handling the system board:
When handling the system board, bear the following in mind.
• The system board has an accelerometer, which can be broken by applying several thousands of G-forces.
Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject
the accelerometer to as much as 6,000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or conductive
corrugated material.
For access, remove these FRUs in order:
• "1010 Battery pack" on page 52
• "1020 Bottom slot cover" on page 52
• "1030 DIMM" on page 54
• "1040 Hard disk drive (HDD)" on page 55
• "1050 PCI Express Mini Card for wireless LAN" on page 56
• "1060 PCI Express Mini Card for wireless WAN" on page 57
• "1070 Keyboard" on page 59
• "1080 Top case assembly and microphone module" on page 61
• "1090 Backup battery" on page 64
• "1100 Bluetooth daughter card (BDC-2)" on page 65
• "1110 Speaker assembly" on page 66
Removal steps of system board and fan assembly
Following components soldered on the top side of the system board are extremely sensitive. When you
service the system board, avoid any kind of rough handling.
68
Hardware Maintenance Manual
Downloaded from LpManual.com Manuals