Control Panel - Panasonic MDF-594C Operating Instructions Manual

FREEZER COMPONENTS

Control panel

1. Alarm buzzer stop key (BUZZER): To stop the alarm from sounding, press this key. Should a
further abnormality occur, the buzzer will sound automatically.
2. Filter check lamp (FILTER CHECK): This lamp flashes and buzzer sounds when the condenser
filter is clogged. Clean the condenser filter according to page 18 "Cleaning of condenser filter".
3. Alarm lamp (ALARM): This lamp is flashed during alarm condition.
4. Alarm test key (ALARM): Check that the alarm lamp and the buzzer are functional when the
freezer is operating well.
5. Mode setting key. (PV/SV): This key has functions.
PV: Present freezer compartment temperature is displayed.
SV: Setting temperature is displayed. When the desired temperature is set, this key should be
pressed (SV side). The temperature setting can be done by using (5),(6),(7),(8), keys, initial setting
temperature is -80
6. Digit shift key (
using this key.
7. Numerical value shift key (
this key.
8. Enter key (ENT):
commence toward this new point.
9. Battery switch(
Turn it off when you do not drive for a long time. (More than 1 month)
10. Power switch (POWER): Power all functions except remote alarm and Backup cooling kit (Option).
1
o
C.
): The digit of the figure displayed for temperature adjustment can be shifted
): The figure that is displayed digitally can be changed by pressing
When the desired temperature is reached, press this key.
): It is the switch of the battery for the power failure alarm. Turn it on usually.
7
2 3 4 5 6
10 9
10
8
Operation will