Product Description; Control Panel - IKEA HARMONISK Instruction

ENGLISH
Product description
3
Control panel
LED 1 LED 2
A B C
To select the functions of the hood just touch
the commands.
A
BUTTON ON/OFF (stand-by)
Functions included:
Motor OFF
Touch briefly to switch the motor off.
Reset filter alarm signals
In functioning mode, after carrying out
filter maintenance, touch the button until
hearing the sound signal. The flashing
LED 1 (grease filter) or 2 (carbon filter)
stops flashing.
1
2
4
5
D E F
1
Chimney.
2

Control Panel.

3
Light.
4
Panel.
5
Grease Filter (hidden by the panel).
Excluding the electronics
Touch the button
The hood command electronics will be
excluded. This function can be useful
during the product cleaning operations.
Just repeat the operation to reinsert the
electronics.
If the hood fails to operate correctly,
briefly disconnect it from the mains
power supply for almost 5 sec. by pulling
out the plug. Then plug it in again and
try once more before contacting the
Technical Assistance Service.
B
LOW-SPEED BUTTON (suction power).
When flashing it indicates the need to
wash the grease filter.
C
MEDIUM-SPEED BUTTON (suction
power). When flashing it indicates the
need to wash or replace the carbon
filter. This signal is normally deactivated.
A
for 3 seconds.
7