Setup; Loose Parts - Toro 30366 Operator's Manual

Setup

Note: Determine the left and right sides of the machine from the normal operating position.

Loose Parts

Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been received. Without these parts,
total setup cannot be completed. Some parts may have already been assembled at the factory.
Description
Discharge deflector assembly (rubber)
Screw, 5/16 x 7–1/2 in.
Spacer tube
Torsion spring
Flange nut, 5/16
Pivot pin assembly
Cotter pin
Lift arm R.H.
Lift arm L.H.
Thrust washer–nylon
Clevis pin
Hair pin
Height of cut collar
Clevis pin
Hair pin
Capscrew, 1/2 x 3/4 in.
Washer
CE certificate
Parts catalog
Operator's manual
Qty. Use
1
1
Mount to side of cutting unit
1
(Model 30368 only)
1
1
2
Mount lift arms to traction unit
2
1
1
4
4
2
Mount cutting unit to lift arms
2
2
2
2
2
1
1
1 Read before operating the machine.
10