Specifications; Attachments/Accessories - Toro 07354 Operator's Manual

Industrial utility vehicle with bed
Table of Contents

Advertisement

1. Passenger hand hold
Seat Adjusting Lever
The seats can be adjusted fore and aft for operator
comfort (Figure 9).
1. Seat adjusting lever
Figure 8
2. Storage compartment
Figure 9

Specifications

Note: Specifications and design are subject to change
without notice.
Dimensions
Overall Width
Overall Length
Base Weight (Dry)
Rated Capacity
(includes 200 lb.
operator, 200 lb.
passenger and loaded
attachment).
Maximum. Gross
Vehicle Weight
Tow Capacity
Ground Clearance
Wheel Base
Wheel Tread (center
line to center line)
Height

Attachments/Accessories

A selection of Toro approved attachments and
accessories are available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
17
63 inches (160 cm)
w/o bed: 128.25 inches (326 cm)
w/full bed: 130.38 inches (331 cm)
w/2/3 bed in rear mounting location:
136.38 inches (346 cm)
1806 lb (819 kg)
3044 lb (1381 kg)
4,850 lb (2200 kg)
Tongue weight 600 lb (272 kg)
Maximum trailer weight 3,500 lb (1587
kg)
7 inches (18 cm) w/ no load
70 inches (118 cm)
Front: 46 inches (117 cm)
Rear: 47.7 inches (121 cm)
75 inches (190.5 cm) to top of ROPS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workman hdx-d

Table of Contents