Table of Contents
Advertisement
Rotating the Hedge Trimmer
Handle
1. Press and hold the rotational lock button.
1. Rotational lock button
2. Rotate the handle to the right or left depending on desired
cutting direction, then release the rotational lock button to
lock the handle in the desired position.
Figure 4
2. Handle
Stopping the Hedge Trimmer
1. Release either the trigger switch or the auxiliary handle
trigger (Figure 3).
2. Allow at least 5 seconds for the cutting blade to stop moving.
Charging the Battery Pack
Important: For best results, your battery tool should be
charged in a location where the temperature is more than 5°
C (41° F) but less than 40° C (104° F). To reduce the risk of
serious personal injury, do not store outside or in vehicles.
Charging time will be increased if not charged within this
range.
1. If the power cord is not plugged in to the charger, plug it
into the charger (Figure 5), then plug the power cord into
a power socket.
Note: Use the power cord that matches your power sockets.
2. Turn the battery upside down and line up the battery terminal
with the slot in the charger (Figure 5 and Figure 6).
1. Insert battery here
2. LED indicators
7
Figure 5
3. Charge/storage mode
switch
4. Power cord plug-in
location
Advertisement
Table of Contents
