Rotating The Hedge Trimmer Handle; Stopping The Hedge Trimmer; Charging The Battery Pack - Toro 51494 Operator's Manual

Rotating the Hedge Trimmer
Handle
1. Press and hold the rotational lock button.
1. Auxiliary handle
2. Rotational lock button
2. Rotate the handle to the right or left depending on desired
cutting direction, then release the rotational lock button to
lock the handle in the desired position.
Stopping the Hedge
Trimmer
1. Release the trigger switch
2. Allow at least 5 seconds for the cutting blade to stop moving.

Charging the Battery Pack

Important:
For best results, your battery pack should be
charged in a location where the temperature is more than 0°
C (32° F) but less than 40° C (104° F). To reduce the risk of
serious personal injury, do not store outside or in vehicles.
Charging time will increase if it is not charged within this
range.
1. Turn the battery upside down and line up the battery terminal
with the slot in the charger
Figure 3
3. Handle
(Figure 2).
(Figure 4 and Figure 5).
g016188
1. LED indicators
1. LED indicators (level of
charge)
2. Release button
2. Slide the battery into the charger until it clicks into place.
3. To remove the battery, press down on the release button
and slide the battery backwards out of the charger.
5
Figure 4
2. Insert battery here
Figure 5
3. Battery terminal
g019895
g016223