Panasonic DMP-BDT570 Operating Instructions Manual page 38

Messages on the unit's display
F99
The unit fails to operate properly. Touch [Í/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
NET
While connecting to a network.
NoPLAY
There is a viewing restriction on a BD-Video
or DVD-Video. (
NoREAD
The media is dirty or badly scratched. The
unit cannot play.
Remove
The USB device is drawing too much power.
Remove the USB device.
Setcode
(" " stands for a number.)
The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold
[OK] and the
indicated number
button at the same time for more than 5
seconds.
U59
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
Start
A firmware update will start. Please do not
turn off the unit.
UPDATE /5
(" " stands for a number.)
A firmware update is in progress.
Please do not turn off the unit.
Finish
The firmware update is complete.
32)
Reference
- 38 -