Panasonic DMP-BDT570 Operating Instructions Manual page 35

You have forgotten your ratings password.
You want to cancel the ratings level.
The ratings level returns to the factory
defaults.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– "00 RET" is displayed on the unit's display.
3 Press [1] (right) repeatedly on the remote
control until "03 VL" is displayed on the unit's
display.
4 Press [OK].
The TV screen turns black.
In the following cases, HDMI authentication
takes place and a black screen is displayed:
– When "24p / 25p Conversion" is set to
"Auto".
– When "24p Output" is set to "On".
– When the display is switched between 2D
and 3D images.
– When you quit the 4K playback by
displaying another screen, including the
HOME menu.
– When "HDMI Output Settings of Music
Playback" is set to "Sound Quality Priority".
This unit does not recognize the USB
connection correctly.
Disconnect and re-connect the USB cable. If
it still does not recognize the connection, turn
this unit off and on again.
USB devices may not be recognized by this
unit when connected using the following :
– a USB hub
– a USB extension cable
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
The buttons of the unit do not work.
Touch the buttons with your finger. They may
not work if operated with your fingernails or
hands wearing gloves.
Reference
Picture
The images from this unit do not appear on
the TV.
Picture is distorted.
An incorrect resolution is selected in "HDMI
Video Format". Reset the setting as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– "00 RET" is displayed on the unit's display.
3 Press [1] (right) repeatedly on the remote
control until "04 PRG" is displayed on the
unit's display.
4 Press and hold [OK] for more than 5 seconds.
Set the item again. (
– When Dolby Digital Plus, Dolby TrueHD,
and DTS-HD
select "Yes" in "Default Settings" (
make proper settings.
The connected devices are changed. Reset
the setting as follows:
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– "00 RET" is displayed on the unit's display.
3 Press [1] (right) repeatedly on the remote
control until "13 L4K" is displayed on the unit's
display.
4 Press and hold [OK] for more than 5 seconds.
– "4K ( 50p/60p ) Output" will be set to "Off".
Make the correct setting again. (
The unit and TV are using different video
systems.
1 Turn the unit on.
2 Press and hold [OK], the yellow button and
the blue button on the remote control at the
same time for more than 5 seconds.
– "00 RET" is displayed on the unit's display.
3 Press [1] (right) repeatedly on the remote
control until "05 P/N" is displayed on the unit's
display.
4 Press and hold [OK] for more than 5 seconds.
The system switches from PAL to NTSC or
vice versa.
- 35 -
28)
audio are not output properly,
®
33) and
28)