Panasonic DMP-BDT570 Operating Instructions Manual page 26

∫ 24p / 25p Conversion
Play back videos with film-like motion.
≥ When this unit is connected to a TV compatible
with 4K/24p or 4K/25p:
If "HDMI Video Format" (
"Automatic", videos will be output in 4K/24p or
4K/25p.
≥ When this unit is connected to a TV compatible
with 1080/24p or 1080/25p:
If "HDMI Video Format" (
"Automatic", "1080i" or "1080p", videos will be
output in 1080/24p or 1080/25p.
≥ Noise may appear on the image when you
switch the setting.
∫ Progressive
Select the method of conversion for progressive
output to suit the type of material being played.
≥ If the video is disrupted when "Auto" is selected,
select either "Video" or "Film" depending on the
material to be played back.
∫ Reset to Default Picture Settings
Return "Picture Settings" of the selected tab ("Set
1" or "Set 2") to the factory preset.
Sound Effect Settings
∫ Sound Effects
*1, *2
Select the sound effect.
≥ Night Surround :
Enjoy a movie with powerful sound even when
the volume is kept low at night. The audio is set
in such a way that it can be heard easily.
≥ Re-master :
This feature gives you brighter sound by
increasing the high frequency portion of the
audio.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
Re-master 1 Pop and rock
Re-master 2 Jazz
Re-master 3 Classical
Settings
28) is set to
28) is set to
- 26 -
≥ Digital Tube Sound :
This feature gives you a warm sound, like that
produced by a vacuum tube amplifier.
(Upsampling up to 192 kHz/32 bit is possible.)
Recommended setting
Digital Tube
A crisp, delicate sound
Sound 1
Digital Tube
A tight, hi-fi sound
Sound 2
Digital Tube
A soft, rich sound
Sound 3
Digital Tube
A clear, powerful sound
Sound 4
Digital Tube A distinctive mid-range
Sound 5 sound
Digital Tube
A soft, enveloping sound
Sound 6
∫ Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in "Sound Effects".
≥ Even when "96/88.2kHz" is selected, an audio
source with a sampling frequency of 96 kHz or
higher will be output with the original sampling
frequency.
≥ When "Sound Effects" is set to "Off", this setting
is disabled.
∫ DSD Decode Sampling Frequency
Select the settings that suit your sound quality
preferences.
∫ DSD LPF Setting
Select the settings that suit your sound quality
preferences.
Not every function can be set individually.
*1
This function is effective for audio from HDMI AV OUT or
*2
DIGITAL AUDIO OUT only when "Digital Audio Output" is
set to "PCM" ( 29).