Servicing The Engine Oil - Toro 74941CP Operator's Manual

Servicing the Engine Oil

Oil Type: Detergent oil (API service SG, SH, SJ, or SL)
Oil Capacity: with a filter change, 77 ounces (2.3 L);
without a filter change, 70 ounces (2.1 L)
Viscosity: See the table below.
Note: Use of multi-grade oils (5W-20, 10W-30, or
10W-40) will increase oil consumption. Check the oil
level more frequently when using them.
Checking the Engine Oil Level
Service Interval: Before each use or daily
Note: Check the oil when the engine is cold.
WARNING
Contact with hot surfaces may cause personal
injury.
Keep hands, feet, face, clothing and other body
parts away from the muffler and other hot surfaces.
Important: Do not overfill the crankcase with oil
because damage to the engine may result. Do not
run engine with oil below the low mark because the
engine may be damaged.
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 45).
Figure 44
1
3
6
8
34
2
5
4
7
10
9
Figure 45
G008804
G008792