Epson STYLUS PRO 4400 Reference Manual page 29

Mode
Drying Time
per Print
Head Pass
Paper Feed
Adjustment
Paper Suction
Paper
Thickness
Cut Method
Downloaded from ManualsPrinter.com Manuals
Description
Adds a waiting time when the print head reaches the end
of every pass.
Set this value using the slider or text box. To improve the
print quality by using slow ink absorption on the media,
set a higher value.
The drying time per print head pass can be set from 0 to
5 seconds, in 0.1 second increments.
Note:
If you use this feature, the printing time will be longer.
Controls the paper feeding value, in 0.01% increments. If
the paper feeding value is too large, white horizontal
micro banding may appear. If the paper feeding value
is too small, dark horizontal micro banding may appear.
Decreasing the air suction at the platen can avoid
wrinkling or waving of thin or saturated media, or
eliminating vertical banding. The relationship of the
parameter and the suction power is indicated as follows:
Standard : 100%
-1: 50%
-2: 30%
-3: 10%
-4: 6%
This value automatically appears according to the Media
Type setting. If you use non-Epson media, modify this
value for your media. Refer to the paper specifications,
or print "Thickness Pattern" to find out the paper thickness.
Determines the best cutting method according to the
paper thickness.
Standard: Normal speed and normal cut pressure
Thin Paper: Low cut pressure
Thick Paper, Fast: High speed and high cut pressure
Thick Paper, Slow:Low speed and high cut pressure
Printing with Windows
1
1
1
1
1
1
1
1
1
1
1
1
29