Setting The Temperatures - Danfoss ECL Comfort 210 User Manual

4.0 Setting the temperatures

Depending on the chosen circuit and mode,
it is possible to enter all daily settings
directly in the overview displays.
Setting the desired room temperature
The desired room temperature can easily
be adjusted in the overview displays for the
heating circuit.
Action: Purpose:
Desired room temperature
Confirm
Adjust the desired room
temperature
Confirm
If you want to change the desired room
temperature for saving mode, choose the
mode selector and select saving mode.
Setting the desired DHW temperature
The desired DHW temperature can easily
be adjusted in the overview display for the
DHW circuit.
Action: Purpose:
Desired DHW temperature
Confirm
Adjust the desired DHW
temperature
Confirm
In addition to the information about desired
and actual DHW temperature, today's
schedule is visible.
Setting the desired room temperature,
ECA 30 / ECA 31
The desired temperature can be set as in the
controller. However, other symbols can be
present in the display (please see the page
about symbols).
VI.KT.Y2.02
Actual
Examples:
outdoor
temp.
20.5
Actual
room
temp.
21.0
The setting of the desired room
temperature is important even if a room
temperature sensor / Remote Control Unit
is not connected.
Examples:
Actual
50
DHW
temp.
55
With the ECA 30 / ECA 31 you can override
the desired room temperature set in the
controller temporarily by means of the
override functions:
Mode: Comfort
Desired room temp.
Mode: Scheduled
Desired DHW temp.
© Danfoss | 2016.02 | 7