Using The Scanner Glass - Brother dcp-9045cdn User Manual

a
Unfold the ADF document output
support flap (1) and the ADF support
flap (2).
b
Fan the pages well.
c
Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller.
d
Adjust the paper guides to fit the width of
your document.
CAUTION
To avoid damaging your machine while
using the ADF, DO NOT pull on the
document while it is feeding.
To scan non-standard documents see
Using the scanner glass on page 19.

Using the scanner glass

You can use the scanner glass to scan or
copy the pages of a book or one page at a
time. Documents can be up to 215.9 mm wide
1
to 355.6 mm long (8.5 inches wide and up to
14 inches long).
To use the scanner glass, the ADF must be
empty.
a
Lift the document cover.
b
Using the document guidelines on the
left, centre the document face down on
the scanner glass.
c
Close the document cover.
If the document is a book or is thick,
DO NOT slam the cover or press on it.
Loading paper and documents
CAUTION
2
2
19