B. To step up and down programs
During the normal TV program reception, each time press the
cursor button (up/down) on the remote control or the program
buttons on the front panel, the on-screen display will change
Note: 1. " + " means program number increase, " - " means program
2. The display does not show the deleted program.
Adjust the sound volume by pressing the cursor button (left/right) on
the remote control or the volume control buttons on the front panel.
Mute sound by pressing the Mute button. Press the Mute button
again or the cursor button right to return to the normal sound.
When the headphones are connected, the headphones sound
volume is controlled by using the volume increase or decrease
Note: If the headphones are connected to the TV, the sound is
sent to the headphones, not to the speaker.
To display the picture controls menu
Press the MENU button.
Select the menu line Picture with the cursor
Press the OK button on the remote control, the
picture menu will be displayed on the screen.
Select the menu line Brightness, Contrast, Colour,
Sharpness or Tint (NTSC only) with the cursor
Adjust them by using the cursor button (left/right).
When you finish adjustment, press the OK button
to save your selection, the display will disappear.
In the picture menu, if you press the OK button directly
and do not make any selection, the Personal will be
displayed on the screen.
...... 10 ...... 3 ......
- 12 -