Remote Control - Akai CT-T29S32S Operator's Manual

Remote control

1. Standby button
to switch off to standby and power on from standby
2. Sound Mute button
to mute and restore sound
3. Number buttons (0-9)
to select a TV channel or switch on from standby
( " 0 " button with AV function)
4. I.P.C.(Intelligent Picture Control) button
to select picture settings
5. D.C.C.(Digital Colour Control) button
6. Cursor button up
to select the next program
7. OK button
to store the changes
8. MENU button
to display menu
9. Cursor button right
to increase the volume
10. Cursor button left
to decrease the volume
11. Cursor button down
to select the previous program
Remark:
The MENU(MENU/OK) button and VOLUME/PROGRAM
buttons on the TV front panel also have the same
function available to the menu.
Fitting and changing the batteries
Remove the cover of the battery compartment on the rear of
the remote control. Insert two 1.5V UM3 (AA) batteries into
the compartment, take care to observe the + and - markings
indicated inside, then close the cover.
Note:
* Do not use a mixture of old and new batteries.
* Do not expose batteries to heat or try to dismantle them.
* Do not throw batteries into fire or water.
* Remove the batteries when not using the unit for a long time.
2
5
6
7
10
- 7 -
1
3
4
8
9
11