Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Onkyo PR-SC5508 Instruction Manual

Advanced Operations

Advanced Setup

On-screen Setup Menus

This manual describes the procedure using the
remote controller unless otherwise specified.
MENU
1. Input/Output Assign
a
b 2. Speaker Setup
3. Audio Adjust
c
d 4. Source Setup
5. Listening Mode Preset
e
f 6. Miscellaneous
7. Hardware Setup
g
h 8. Remote Controller Setup
i 9. Lock Setup
a Input/Output Assign
44)
(➔
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
5. Analog Audio Input
b Speaker Setup
(➔ 48)
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
c Audio Adjust
(➔ 51)
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Audyssey DSX
5. Theater-Dimensional
6. LFE Level
7. Direct
d Source Setup 53)
(➔
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
e Listening Mode Preset
58)
(➔
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. PC
6. AUX
f Miscellaneous
59)
(➔
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
g Hardware Setup
(➔ 60)
7. Hardware Setup
1. Remote ID
2. Multi Zone
3. Tuner
4. HDMI
5. Auto Power Down
6. Network
7. Firmware Update
h Remote Controller
Setup (➔ 86, 91)
8. Remote Controller Setup
1. Remote Mode Setup
2. Activities Setup
i Lock Setup 62)
(➔
9. Lock Setup
Setup

Common Procedures in Setup Menu

ENTER
q/w/e/r
SETUP
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV control-
ler's various settings. Settings are organized into 9 catego-
ries on the main menu.
Carry out the settings by using the on-screen display.
1
Press RECEIVER followed by SETUP.
The following menu appears.
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
Tip
• If the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
2
Use q/w to select a menu, and then press ENTER.
3
Use q/w to select target and then press ENTER.
4
Use q/w to select option and use e/r to change
the setting.
Press SETUP to close the menu.
Press RETURN to return to the previous menu.
Note
• This procedure can also be performed on the AV controller by
using SETUP, arrow buttons, and ENTER.
• During Audyssey MultEQ ® XT32 Room Correction and
Speaker Setup, messages, etc., that are displayed on the TV
screen will appear in the Display.
RECEIVER
RETURN
En
43