Adjusting The Listening Modes - Onkyo HT-S590 Instruction Manual

Adjusting the Listening Modes

ON/STANDBY
1
V 1
4
7
TAPE
+ 10
--/---
TOP MENU
SP A / B
ENTER
PLAYLIST
RETURN
RETURN
STEREO
AUDIO
TEST TONE
DISPLAY
Using the Audio Adjust Functions
Some functions are not available with all speaker config-
urations.
Audio Adjust provides various functions for adjusting
the sound.
1 Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
RECEIVER
SETUP
48
REMOTE MODE
RECEIVER
RECEIVER DVD
TAPE
INPUT SELECTOR
C D
2 3
V 2 V 3
MD
5 6
MULTI CH DVD
8 9 CDR
TUNER C D
0 CLR HDD
DIMMER SLEEP
CH
VOL
DISC
ALBUM
MENU
MUTING
ENTER
PLAYLIST
SETUP
SETUP
LISTENING MODE
SURROUND
SUBTITLE RANDOM REPEAT
LEVEL - LEVEL +
CH SEL
PLAY MODE
CINE FLTR
OR-EQ L NIGHT CINE FLTR
L NIGHT
RC - 646 S
2
Use the Up and Down [ ]/[ ]
buttons to select "4. Audio
Adjust," and then press the
[ENTER] button.
ENTER
3
Use the Left and Right [
buttons to change the settings.
Press the Down [ ] button to
select the next setting.
4
Repeat step 3 to complete all set-
tings.
5
Press the [SETUP] button.
Setup closes.
When you want to go back up one
menu level to "Audio Adjust," press the
SETUP
[RETURN] button.
The Audio Adjust functions are explained below.
Input Channel Settings
■ Multiplex
This setting determines which channel is output from a
stereo multiplex source. Use it to select audio channels
or languages with multiplex sources, multilingual TV
broadcasts, and so on.
Main: The main channel is output (default).
Sub: The sub channel is output.
M/S: Both the main and sub channels are output.
■ Mono (2ch)
This setting determines which channel is output when
the Mono listening mode is used with a stereo source.
L+R: Both the left and right channels are output
(default).
L: Only the left channel is output.
R: Only the right channel is output.
]/[ ]