Onkyo HT-S590 Instruction Manual page 30

Connecting Your Components—Continued
Connecting a Satellite, Cable, Set-top Box, or Other Video Source
Step 1: Video Connection
Connect your set-top box's video output jack to the AV receiver's VIDEO 2 IN jack and connect the AV receiver's
A
MONITOR OUT jack to your TV's video input jack.
If your VCR and TV have component video jacks, connect your set-top box's component video output to the AV
B
receiver's COMPONENT VIDEO VIDEO 2 IN jacks, and connect the AV receiver's COMPONENT VIDEO
OUT jacks to your TV's component video in jacks. This offers better picture quality than composite video.
Connect a coaxial feed from a TV antenna to your set-top box's antenna input jack (e.g., RF IN), and connect
C
your set-top box's antenna output jack (e.g., RF OUT) to your TV's antenna input jack.
Step 2: Audio Connection
Connect your set-top box's audio output jack to the AV receiver's VIDEO 2 IN L/R jacks.
a
If your set-top box has an optical digital audio output jack, connect it to the AV receiver's DIGITAL IN OPTI-
b
CAL 1 jack. You can enjoy Dolby and DTS listening modes with this connection.
If your set-top box has a coaxial digital audio output jack instead of an optical one, connect it to the AV receiver's
c
DIGITAL IN COAXIAL jack, and set the DIGITAL INPUT assignment to COAX (see page 35). Coaxial con-
nections perform the same as optical ones.
: Signal Flow
HT-R340
c
b
OPTICAL COAXIAL
OUT OUT
30
COMPONENT VIDEO IN
Y P P
B
B
B A
L
Y P P VIDEO
B R
OUT
COMPONENT VIDEO OUT
TV, projector,
VIDEO IN
R
etc.
A
Coaxial feed from TV antenna
a
R
AUDIO
OUT
Satellite, cable, set-top
box, etc.
Antenna input
(e.g., RF IN)
Coaxial feed
C
Antenna input Antenna output
(e.g., RF IN) (e.g., RF OUT)
C