Onkyo HT-S580 Instruction Manual page 45

Using the Listening Modes—Continued
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Source
Listening mode
Direct
Stereo
Mono
Multich
PLII Movie/Music/Game
Neo:6 Cinema
*3
Neo:6 Music
Dolby D
DTS
Mono Movie
Orchestra
Onkyo Unplugged
*3
Original Studio-Mix
DSP TV Logic
All Ch Stereo
Full Mono
*1. In the Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz
respectively. 96 kHz signals are processed at 48 kHz for all listening modes other than Direct, and Stereo.
*2. DTS 96/24 is always processed as DTS.
*3. Available only when Surround speakers are connected.
Tip: You can check the format of the digital input signal on page 37, "Displaying Source Information."
Dolby D
Analog,
*1 2/0
PCM
*/2
(Stereo)
CD, TV, VHS,
MD,
turntable,
DVD, DTV, etc.
radio,
cassette,
DTV, etc.
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔
✔ ✔ ✔
DTS/DTS 96/24
1/0,1+1 Other 3/2.1
(Stereo)
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔ ✔ ✔
*2
Multich
DTS-ES
2/0
Discrete Matrix
DVD, CD, etc. DVD
✔ ✔ ✔
✔ ✔
✔
✔
✔
✔ ✔
45