Electrolux R04PVF4M Maintenance Manual page 9

C.2.3 SAFETY SIGNS TO BE PLACED ON THE MACHINE
OR NEAR ITS AREA
PROHIBITION
MEANING
Do not remove the safety
devices.
Do not use water
to extinguish fires (shown on
electrical parts).
DANGER MEANING
DANGER OF BURNS.
DANGER OF ELECTROCUTION
(shown on electrical parts with
indication of voltage).
ATTENTION!
Do not remove, tamper with or make illegible the
safety, danger and instruction signs and labels on
the machine.
C.2.4 END OF USE
When the appliance is no longer to be used, make it unusable
by removing the power supply wiring.
C.2.5 INSTRUCTIONS FOR USE AND MAINTENANCE
Risks mainly of a mechanical, thermal and electrical nature
are present in the machine.
Where possible the risks have been neutralised:
• directly, by means of adequate design solutions,
• or indirectly by using guards, protection and safety devices.
Any anomalous situations are signalled on the control panel
display.
During maintenance several risks remain, as these could not
be eliminated, and must be neutralised by adopting specific
measures and precautions.
Do not carry out any control, cleaning, repair or maintenance
operations on moving parts.
Workers must be informed of the prohibition by means of clearly
visible signs. To guarantee machine efficiency and correct
operation, periodical maintenance must be carried out
according to the instructions given in this manual. In particular,
make sure to periodically check correct operation of all the
safety devices and the insulation of electrical cables, which
must be replaced if damaged.
ATTENTION!
Machine maintenance operations must only be
carried out by specialised Technicians provided
with all the appropriate personal protection
equipment (safety shoes, gloves, glasses,
overalls, etc.), tools, utensils and ancillary
means.
ATTENTION!
Never operate the machine, removing, modifying
or tampering with the guards, protection or safety
devices.
ATTENTION!
Before carrying out any operation on the machine,
always consult the manual which gives the correct
procedures and contains important information
on safety.
C.2.6 REASONABLY FORESEEABLE IMPROPER USE
Improper use is any use different from that specified in this
manual. During machine operation, other types of work or
activities deemed improper and that in general can involve
risks for the safety of operators and damage to the appliance
are not allowed.
Reasonably foreseeable improper use includes:
• lack of machine maintenance, cleaning and periodical checks;
• structural changes or modifications to the operating logic;
• tampering with the guards or safety devices;
• failure to use personal protection equipment by operators,
specialised technicians and maintenance personnel;
• failure to use suitable accessories (e.g. use of unsuitable
equipment or ladders);
• keeping combustible or flammable materials, or in any case
materials not compatible with or pertinent to the work, near
the machine;
• wrong machine installation;
• placing in the machine any objects or things not compatible
with refrigeration, freezing or preservation, or that can damage
the machine, cause injury or pollute the environment;
• climbing on the machine;
• non-compliance with the requirements for correct machine
use;
• other actions that give rise to risks not eliminable by the
Manufacturer.
ATTENTION!
The previously described actions are prohibited!
C.2.7 RESIDUAL RISKS
The machine has several risks that were not completely
eliminated from a design standpoint or with the installation of
adequate protection devices.
Nevertheless, through this manual the Manufacturer has taken
steps to inform operators of such risks, carefully indicating the
personal protection equipment to be used by them.
Sufficient spaces are provided for during the machine
installation stages in order to limit these risks.
To preserve these conditions, the areas around the machine
must always be:
• kept free of obstacles (e.g. ladders, tools, containers, boxes,
etc.);
• clean and dry;
• well lit.
For the Customer's complete information, the residual risks
remaining on the machine are indicated below: such actions
are to be considered incorrect and therefore strictly forbidden.
RESIDUAL
RISK
Slipping or The operator can slip due to water or dirt
falling
Burns/abrasions
(e.g. heating unintentionally touches some components
elements, cold
tray, cooling protective gloves (e.g. the compressor
circuit plates and outlet pipe in positive temperature and
pipes)
Contact with live parts during maintenance
Electrocution operations carried out with the electrical
The operator works on the machine using
Falling from
unsuitable systems to access the upper
above
part (e.g. rung ladders, or climbs on it).
When handling the machine or the packing
containing it, using unsuitable lifting
Tipping of loads
systems or accessories or with the load
Chemical Inhalation of refrigerant gas. Therefore
(refrigerant gas) always refer to the appliance labels.
36
DESCRIPTION OF HAZARDOUS
SITUATION
on the floor.
The operator deliberately or
inside the machine without using
"wine" models, T > 60°C).
panel powered.
unbalanced.