Onkyo TX-SR503E Instruction Manual page 43

Using the Listening Modes
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Source
Listening mode
Pure Audio (not North
American model)
Direct
Stereo
Mono
Multich
*3
PLIIx Movie/Music/Game
Neo:6 Cinema
*4
Neo:6 Music
Dolby D
Dolby D EX
Dolby D+PLIIx Music
Dolby D+PLIIx Movie
DTS, DTS 96/24
DTS-ES Discrete
DTS-ES Matrix
DTS+Neo:6
DTS+Dolby EX
DTS+PLIIx Music
DTS+PLIIx Movie
Mono Movie
Orchestra
Onkyo Unplugged
*4
Original Studio-Mix
DSP TV Logic
All Ch Stereo
Full Mono
*1. In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz
respectively. 96 kHz signals are processed at 48 kHz for all listening modes other than Pure Audio, Direct, and Stereo.
*2. In the Pure Audio, Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else is processed as DTS.
*3. If the Surr Back parameter is set to "None," or speaker set B is on, PLII is used.
*4. Available only when Surround speakers are connected.
*5. If the Surr Back setting is set to "None," or speaker set B is on, DTS is used.
: Not available when the Surr Back parameter is set to None, or when speaker set B is on.
: Not available when the Surr Back parameter is set to None or 1ch, or when speaker set B is on.
Tip: You can check the format of the digital input signal on page 35, "Displaying Source Information."
Dolby D
Analog,
*1
2/0
PCM
*/2
(Stereo)
CD, TV, VHS,
MD,
turntable,
DVD, DTV, etc.
radio,
cassette,
DTV, etc.
✔ ✔ ✔
✔ ✔ ✔
✔ ✔
✔
✔
✔
✔ ✔ ✔
DTS/DTS 96/24
1/0,1+1 Other 3/2.1
(Stereo)
✔ ✔ ✔
✔ ✔ ✔
✔
✔
✔
✔
✔ ✔ ✔
*2
Multich
DTS-ES
2/0
Discrete Matrix
DVD, CD, etc. DVD
✔ ✔ ✔
✔ ✔
✔
✔
✔
*5
✔
✔
✔ ✔
43