Using The Listening Modes; Selecting Listening Modes - Onkyo TX-SR503E Instruction Manual

Using the Listening Modes

Selecting Listening Modes

See "About the Listening Modes" on page 44 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
• While a pair of headphones is connected,
you can select only the Pure Audio (not
North American model), Mono, Direct, or
Stereo listening mode.
Selecting on the AV receiver
STANDBY/ON
STANDBY
A SPEAKERS B TONE +
PHONES
PURE AUDIO MULTl CH DVD
PURE AUDIO
STEREO
■ [PURE AUDIO] button (not North American
model)
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver outputs
no video signals and its display is turned off.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
42
TUNING / PRESET
ENTER
RETURN SETUP
STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD
VCR
LISTENING MODE
]/[ ] buttons
Selecting with the Remote Controller
SURROUND
STEREO
MASTER VOLUME
■ [STEREO] button
VIDEO 3 INPUT This button selects the Stereo listening mode.
VIDEO L AUDIO R
■ [SURROUND] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
CH
T V VOL VOL
DISC
INPUT
GUIDE PREVIOUS
TOP MENU MENU
SP A / B MUTING
ENTER
RETURN SETUP
LISTENING MODE
STEREO SURROUND
AUDIO SUBTITLE RANDOM REPEAT
TEST TONE CH SEL LEVEL - LEVEL +
PLAY MODE HDD DVD
DISPLAY L NIGHT CINE FLTR
RC - 607 M
]/[ ] buttons
,