Releasing The Cushion For Rear Access - Toro 74534 Operator's Manual

Figure 34
1. Remove battery
Releasing the Cushion for
Rear Access
The cushion can be released for rear access to the machine
for maintenance or adjustment.
1. Lower the platform.
2. Remove the hairpin-cotter pins on each side of the
cushion.
3. Slide the large washers with plastic bushings to the
inside.
4. Remove the cushion and lower it to the platform.
5. Perform any maintenance or adjustment on the
machine.
6. Raise the cushion and slide it onto the pins on both
sides of the machine
7. Slide the large washers with plastic bushings into the
cushion bracket and secure them with a hairpin cotter
(Figure 35).
2. With 2 people, lift the front
end of the mower (ensure
the platform is up)
(Figure 35).
1
3
29
2
4
Figure 35
g012572