Releasing the Parking Brake
1
Figure 15
Operating the Throttle
The throttle control can be moved between Fast and
Slow positions (Figure 16).
Always use the fast position when turning on the
mower deck with the blade control switch (PTO).
Figure 16
Operating the Choke
Use the choke to start a cold engine.
1. If the engine is cold, use the choke to start the
engine.
2. Pull up on the choke knob to engage the choke
before using the ignition switch (Figure 17).
3. Push down on the choke to disengage the choke
after the engine has started (Figure 17).
2
G010079
G008946
1
2
1. On
Operating the Ignition Switch
1. Turn the ignition key to the Start position
(Figure 18). When the engines starts, release the key.
Important: Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start allow a 15 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note: Additional starting cycles may be required
when starting the engine for the first time after the
fuel system has been without fuel completely.
2. Turn the ignition key to stop to stop the engine.
21
G008959
Figure 17
2. Off
G008947
Figure 18