Side-Discharging The Clippings - Toro Super Recycler 20792 Operator's Manual

Figure 23
1. Discharge deflector
Important: Ensure that the rear-discharge plug is
locked in place. To lock the plug, firmly push the
plug in until it snaps into place behind the tabs,
and rotate the lever on the plug to the left (Figure
24).
Figure 24
1. Lever
2. Rear-discharge plug
2. Tabs
Note: To unlock the plug, rotate the lever on the plug
to the right (Figure 24).
5. Lower the discharge deflector.

Side-discharging the Clippings

Use the side discharge for cutting very tall grass.
If the bag is on the machine, remove it and insert the mulch
plug; refer to Removing the Grass Bag (page 11) before
side-discharging the clippings.
Important: Ensure that the rear discharge plug is
locked in place. To lock the plug: Raise the discharge
deflector (Figure 25), firmly push the plug in until it
snaps into place behind the tabs, and rotate the lever on
the plug to the left (Figure 24).
1. Discharge deflector
Note: To unlock the plug, rotate the lever on the plug to the
right (Figure 24).
WARNING
The blade is sharp; contacting the blade can result
in serious personal injury.
Stop the engine and wait for all moving parts to stop
before leaving the operating position.
Installing the Side-discharge Chute
1. Unlock the side-discharge door (Figure 26).
2. Lift open the side-discharge door (Figure 27).
12
Figure 25
2. Rear-discharge plug
Figure 26