Table of Contents
Advertisement
Controls
Become familiar with all the controls before you start the
engine and operate the machine (Figures 7 and 8).
1
3
3
5
m–6878
Figure 7
1. Motion control lever
2. Parking brake lever
3. Height-of-cut lever
4. Fuel cap
3
1
6
9
7
5
Figure 8
1. Ignition switch
2. Throttle
3. Glow plug indicator light
4. Power take off (PTO)
5. Hour meter
8
6
7
4
2
5. Lift assist lever
6. Controls
7. Seat belt
8. Roll bar
8
4
2
m–7397
6. Fuel cap
7. Volt meter
8. Temperature gauge
9. Water in fuel light
Using the Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running. Use
these times for scheduling regular maintenance.
Unlatch the seat and lift it up to view the hour meter
(Fig. 8).
Using the Glow Plug Light (Orange Light)
The glow plug indicator light turns on when the ignition
switch is turned to the On position. When the indicator
light turns off, the engine is ready to be started (Fig. 8).
Using the Water in Fuel Light (Red Light)
The water in fuel light turns on when there is water in the
fuel. When the indicator light turns off, the engine is
ready to be started (Fig. 8).
Using the Temperature Gauge
The temperature gauge registers the temperature of the
coolant in the cooling system (Fig. 8).
Using the Volt Meter
The volt meter registers the output of the charging system
(Fig. 8).
Understanding the Audible
Alarms
This machine has an audible alarm that alerts the user to
turn off the engine or engine damage can occur.
20
103-3276
Advertisement
Table of Contents
