Renault 2016 Duster Owner's Manual page 185

TYRE INFLATION KIT
For all vehicles, with the engine run-
ning and the handbrake applied,
– unroll the hose from the container;
– connect the compressor hose 3 to
the container's inlet 8;
– depending on the vehicle, connect
the container 8 to the compressor
from the container recess 7;
– unscrew the valve cap on the rel-
evant wheel and screw on the con-
tainer's inflation adapter 1;
– adapter 2 must be connected to the
vehicle accessories socket;
– press switch 4 to inflate the tyre to
the recommended pressure (please
refer to the information in the section
on "Tyre pressure");
– after a maximum of 15 minutes, stop
inflating and read the pressure (on
pressure gauge 5).
ENG_NU_1079-6_H79Ph2_Dacia_5
Jaune Noir
(3/4)
Note: while the container is empty-
ing (approximately 30 seconds), the
pressure gauge 5 will briefly indicate
a pressure of up to 6 bar. The pres-
sure will then drop.
– adjust the pressure: to increase
it, continue inflation with the kit; to
reduce it, press button 6.
If a minimum pressure of 1.8 bar is
not reached after 15 minutes, repair
is not possible; do not drive the ve-
hicle but contact an approved dealer.
Noir texte
sudden braking manoeuvres and
obstruct their use.
to pressure loss. Always use valve
caps identical to the original ones
and ensure they are tightly screwed
on.
ENG_UD38373_2
Kit de gonflage des pneumatiques (H79 Ph2 - Dacia)
Nothing should be placed
around the driver's feet
as such objects may slide
under the pedals during
Please be aware that a
poorly tightened or missing
valve cap can make the
tyres less airtight and lead
5.7