Renault 2016 Duster Owner's Manual page 120

CRUISE CONTROL/SPEED LIMITER: cruise control function
2 3
4
Putting the function on
standby
The function is set to standby if you:
– use the switch 5 (O);
– the brake pedal;
– depress the clutch pedal or shift into
neutral if the vehicle has an auto-
matic gearbox.
In all three cases and depending on
the vehicle, the cruising speed remains
stored and, depending on the vehicle,
the message "MEM"or the
ing light appears on the instrument
panel.
Standby is confirmed when indicator
light goes out.
2.44
ENG_NU_1079-6_H79Ph2_Dacia_2
Jaune Noir
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road con-
ditions are suitable (traffic, road sur-
face, weather conditions, etc.). Press
5
switch 4 (R) if the vehicle speed is
above 20 mph (30 km/h).
When the stored speed is recalled, acti-
vation of the cruise control is confirmed
by the illumination of the
light.
NB: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
When the cruise control function is
put on standby, pressing switch 2
warn-
(+) reactivates the cruise control
function without taking into account
the stored speed: it is the speed at
which the vehicle is moving that is
taken into account.
Régulateur-limiteur de vitesse : fonction régulateur (H79 Ph2 - Dacia)
Noir texte
(4/4)
warning
Switching off the function
The cruise control function is deacti-
vated if you press switch 1: in this case
a speed is no longer stored. The two in-
strument panel warning lights
go out to confirm that the function is
deactivated.
must brake by depressing the brake
pedal.
ENG_UD38495_3
1
and
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you