Positioning The Flow Baffle; Positioning The Seat - Toro 74266CP Operator's Manual

Figure 23
1. Cam lock
2. Lever

Positioning the Flow Baffle

The following figures are only recommendations for
use. Adjustments will vary by grass type, moisture
content, and height of grass.
Note: If the engine power draws down and the mower
ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for this
position is a follows.
• Use for short, light grass mowing conditions.
• Use in dry conditions.
• For smaller grass clippings.
• Propels grass clippings farther away from the
mower.
Figure 24
Position B
Use this position when bagging.
3. Rotate cam to increase or
decrease locking pressure
4. Slot
Position C
This is the full open position. The suggested use for
this position is as follows.
• Use in tall, dense grass mowing conditions.
• Use in wet conditions.
• Lowers the engine power consumption.
• Allows increased ground speed in heavy conditions.
• This position is similar to the benefits of the Toro
SFS mower.

Positioning the Seat

Changing the Seat Position
The seat can move forward and backward. Position the
seat where you have the best control of the machine
and are most comfortable.
25
Figure 25
Figure 26