Unlatching The Seat; Pushing The Machine By Hand - Toro 74266CP Operator's Manual

1. To adjust, move the lever sideways to unlock seat
(Figure 27).
Figure 27
1. Seat suspension knob
2. Slide the seat to the desired position and release
lever to lock in position.
Changing the Seat Suspension
The seat can be adjusted to provide a smooth and
comfortable ride. Position the seat where you are most
comfortable.
To adjust it, turn the knob in front either direction to
provide the best comfort (Figure 27).
Changing the Back Position
The back of the seat can be adjusted to provide a
comfortable ride. Position the back of the seat where it
is most comfortable.
To adjust it, turn the knob, under the right-side arm
rest, in either direction to provide the best comfort
(Figure 28).
g012486
2. Seat position adjustment
lever
1. Back rest knob

Unlatching the Seat

1. Move the seat to the most rearward position. This
will prevent interference when the seat is raised.
2. Push the seat latch rearward to unlatch the seat.
3. Raise the seat up. This will allow access to the
machine under the seat (Figure 29).
1. Seat latch
2. Fuel cap

Pushing the Machine by Hand

Important: Always push the machine by hand.
Never tow the machine because hydraulic damage
may occur.
Pushing the Machine
1. Disengage the power take off (PTO) and turn the
ignition key to off. Move the levers to neutral locked
position and apply parking brake. Remove the key.
26
g012487
Figure 28
2. Right-side arm rest
Figure 29
3. Seat