Panasonic PT-44LCX65-K Service Manual page 68

PT-44LCX65-K / PT-52LCX65-K / PT-61LCX65-K
3. Remove the Duct Unit by removing the 3 Screws (421).
Note:
The Joint Piece Unit may be come off when placing down the Optical Block Unit.
4. Remove the Fan Case Unit by removing the 2 Screws (421).
Note:
Do not touch the Air Filter.
5. Remove both the Projection Lens Unit and the LCD/Prism Unit by removing the 4 Screws (434).
Note:
1. Use extreme caution when handling the LCD/Prism Unit to avoid damage, dust, spots (especially fingerprints), etc.
2. Clean the LCD/Prism Unit if necessary. Refer to "CLEANING METHOD" in SERVICE NOTES.
Projection Lens Unit
434
434
Boss
Air Filters
Fan Case Unit
421
LCD/Prism
Unit
421
421
421
Duct Unit
Fig. P3-2
68
421