Panasonic PT-44LCX65-K Service Manual page 38

PT-44LCX65-K / PT-52LCX65-K / PT-61LCX65-K
SERVICE POSITION (4)
BALLAST C.B.A. CHECK
It is possible to check the Ballast C.B.A.
The following original parts are not connected:
Ballast Shield Case Top
Ballast Shield Case Bottom
TV Unit
AC Cord
Refer to "CHECKING THE BALLAST C.B.A." in "TROUBLESHOOTING HINTS FOR COMPONENT LEVEL REPAIR."
LCD Drive C.B.A.
P2501 P2901
Operation C.B.A.
Fig. S4-1
38
CAUTION:
Make sure that the Thermal Fuse Unit
(F001) does not touch any metallic parts
when the Thermal Fuse Unit is not
installed to this original position.
Thermal Fuse Unit
Holder
Ballast P.C.B.
For more details,
See Fig. S4-2.
Connector Cable from the Base C.B.A.
or Power Extension Cable
No connection
Lamp Connector