Panasonic PT-44LCX65-K Service Manual page 60

PT-44LCX65-K / PT-52LCX65-K / PT-61LCX65-K
REMOVAL OF THE MIRROR FROM THE BACK COVER
1. Remove the Screen Unit. Refer to Steps 1~4 in "REMOVAL OF THE SCREEN UNIT FROM THE DISPLAY."
2. (PT-44LCX65-K/PT-52LCX65-K)
1) Remove the 2 Mirror Holder H and the 2 Mirror Holder V Unit (PT-52LCX65-K) by removing the 4 (or 8: PT-52LCX65-K)
Screws (401).
2) Remove the Mirror from the top by releasing the Back Cover slots.
Note: Be careful that the Mirror does not fall down when removing.
(PT-52LCX65-K)
Reassembly Notes for Mirror:
Install the Mirror as following procedures:
1) Place the 3 sheets on the top and bottom edges of the Mirror.
40 mm 10 mm Sheet
10 mm 5 mm
2) Hold the sheet portions of the Mirror, and insert the Mirror from the top into the Back Cover slots carefully.
When handling the Mirror, do not touch the Mirror surface.
3) Install the 2 Mirror Holder H and the 2 Mirror Holder V Unit (PT-52LCX65-K) on the Mirror and tighten the 4 (or 8: PT-52LCX65-
K) Screws (401).
Mirror Holder H
401
401
(PT-52LCX65-K)
Mirror Holder V Unit
(PT-52LCX65)
(PT-44LCX65-K)
Sheet
Mirror surface
Sheet
10 mm
<Front View>
401
401
Fig. D6-1-1
40 mm 10 mm Sheet
75 mm 10 mm
5 mm 20 mm 5 mm
60
Back Cover Slots
Mirror
(PT-52LCX65-K)
Sheet
75 mm
Mirror surface
Sheet
20 mm 5 mm
<Front View>
10 mm
Top edge
of Mirror
Sheet
Sheet
Bottom edge
of Mirror