Suspend To Disk On Critical Battery; Display Always On; Internal Speaker; External Mouse Location - Acer AcerNote Nuovo notebook computer User Manual

6.5.2

Suspend to Disk on Critical Battery

With this parameter set to
disk mode when the battery becomes critically-low. The default setting is
[Enabled]
6.5.3

Display Always On

This parameter lets you specify whether the display is always on or not.
When enabled, the screen will not blank.
[Disabled]
6.5.4

Internal Speaker

This parameter lets you turn the internal speaker on and off. The default
setting is
You can also do this by pressing the speaker on/off toggle hot key
Pressing this hot key changes this parameter setting in Setup.
6.5.5

External Mouse Location

This parameter lets you specify the location of your mouse or similar pointing
device. Four settings are available for this parameter:
COM 2
COM 1
PS/2
Since the touchpad is a PS/2-compatible device, the default setting is
[PS/2]
you do not need to change the setting. If, however, you want to use an
external serial mouse, change this parameter setting accordingly.
Setup
.
to save power.
[Enabled] .
. If you connect an external PS/2 mouse or similar pointing device,
, the notebook enters suspend-to-
[Enabled]
The default setting is
- .
6-19