Connecting To Other Devices; Precautions For Making Connections; Connecting Speakers - Onkyo A-5VL Instruction Manual

Connecting to Other Devices

Connect to playback components, recording devices, and other equipment. There are two ways of connecting: analog and
digital. Select the connection type matching the type of audio you wish to enjoy.
!
Caution
Do not place the unit in a location subject to vibration.

Precautions for Making Connections

Color Coding for Audio Connections
- Take care of the plug colors and the left and right
channels when connecting audio.
- Insert plugs completely to ensure good connections.
Loose connections can cause noise or malfunctions.
Improper connection
Inserted completely
- To prevent interference, keep audio cables away
from power cords and speaker cables.
Digital Connections
There are two types of digital audio in terminal:
"OPTICAL" and "COAXIAL". Use the correct
terminals and cables for the device to connect.

Connecting Speakers

Strip away approx. 5/8 inch (15 mm) of
insulation from the ends of the speaker cables,
and twist the bare wires tightly.
15mm
(5/8 inch)
10
Loosen the screws on the speaker terminals,
insert the wires, and screw the terminals tight.
!
Caution
- Make sure that the wires do not touch metal parts on the
back panel or elsewhere.
- Y plugs cannot be connected.
Connect the speakers as shown in the drawing.
Connect the positive speaker wire
positive terminal on the unit , and the
negative speaker wire
terminal on the unit .
R
SPEAKER A
A-5VL
SPEAKER B
R
to the
to the negative
L
L