Using The Self-Propel Drive; Stopping The Engine; Starting The Engine; Recycling The Clippings - Toro Super Recycler 20837 Operator's Manual

1. Handle lock

Starting the Engine

1. Turn the fuel valve lever to the On position
(Figure 12).
2. Hold the blade control bar against the handle and
pull the recoil starter (Figure 13).
1. Blade control bar
Note: If the mower does not start, contact an
Authorized Service Dealer.
Figure 11
2. Handle positions
Figure 12
Figure 13

Using the Self-propel Drive

To operate the self-propel drive, simply walk with your
hands on the upper handle and your elbows at your
sides, and the mower will automatically keep pace with
you (Figure 14).

Stopping the Engine

Service Interval: Before each use or daily
To stop the engine, release the blade control bar
(Figure 15).
Important: When you release the blade control
bar, both the engine and blade should stop within
3 seconds. If they do not stop properly, stop using
your mower immediately and contact an Authorized
Service Dealer.

Recycling the Clippings

Your mower comes from the factory ready to recycle the
grass and leaf clippings back into the lawn.
Note: The grass bag may remain on the mower while
you are recycling the clippings.
8
Figure 14
Figure 15