Table of Contents
Advertisement
Adjusting the Tracking
1. Remove machine from any jack stands.
2. Check the rear tire pressure. Refer to Checking the
Tire Pressure.
3. Start and run the machine. Observe the tracking
on a level, smooth, hard surface such as concrete
or asphalt.
4. If the unit tracks to one side or the other, turn the
quick track knob. Turn the knob right to steer right
and turn the knob left to steer left (Figure 54).
Figure 54
1. Quick track knob
Adjusting the Traction Spring
The position of the traction spring is adjustable to
increase the traction as attachments, such as a sulky or
bagger, are added to the mower and excessively uneven
terrain.
Use Figure 55 for the traction spring options.
1. Traction spring
2. Left side linkage
3. Most traction for uneven
terrain and attachments
Checking the Tire Pressure
Service Interval: Every 50 hours/Monthly (whichever
comes first)
Check the pressure at the valve stem (Figure 56).
Maintain the air pressure in the rear tires at 12-14 psi
(83-97 kPa). Uneven tire pressure can cause an uneven
cut.
Note: The front tires are semi-pneumatic tires and do
not require air pressure maintenance.
41
Figure 55
4. Medium traction for
moderate conditions
5. Standard traction for
normal conditions
Figure 56
Advertisement
Table of Contents
