Pushing The Machine By Hand; Transporting Machines; Side Discharging Or Mulching The Grass - Toro 30284 Operator's Manual

Commercial walk-behind mower floating deck, pistol grip, hydro with 36in, 40in, 48in or 52in turbo force cutting unit
Hide thumbs Also See for 30284:
Table of Contents

Advertisement

Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.

Pushing the Machine by Hand

The by-pass valves allow the machine to be pushed by
hand without the engine running.
Important: Always push the machine by hand.
Never tow the machine because hydraulic damage
may occur.
To Push the Machine
1. Disengage the PTO, move the motion control
levers to the neutral locked position and set the
parking brake.
2. Open the by-pass valve on both pumps by turning
them counter clockwise 1 to 2 turns. This allows
hydraulic fluid to by-pass the pumps and the wheels
to turn (Figure 11).
Note: Rotate the by-pass valves a maximum of 2
turns so the valve does not come out of the body
causing fluid to run out.
Figure 11
1. Pump by-pass valve
3. Release the parking brake.
4. Push the machine to the desired location.
5. Set the parking brake.
6. Close the by-pass valves, but do not overtighten
them.
Important: Do not start or operate the
machine with the by-pass valves open. Damage
to system may occur.

Transporting Machines

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required by
law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets or bystanders avoid injury.
To transport the machine:
1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Stop the engine, remove the key, set the brake, and
close the fuel valve.
5. Use the metal tie down loops on the machine to
securely fasten the machine to the trailer or truck
with straps, chains, cable, or ropes (Figure 12).
1. Traction unit tie down loop
Side Discharging or Mulching
the Grass
This mower has a hinged grass deflector that disperses
clippings to the side and down toward the turf.
18
Figure 12

Advertisement

Table of Contents
loading

This manual is also suitable for:

302863028830289

Table of Contents