Twin Needle Sewing - ELNA eXperience 580 Instruction Manual

e
w
r
NOTE:
• When you sew patterns with the twin needle, test
the stitches first before you sew on the garment.
• Use the zigzag foot A or satin stitch foot F for twin
needle sewing.
• When changing the sewing direction, raise the
needle and presser foot then turn the fabric.
• When you select stitch patterns not for twin needle
sewing and press the twin needle key, the twin
needle mark will blink on the LCD screen and the
caution buzzer sound.
• Stitch patterns cannot be memorized in the twin
needle mode.
• Use the thread cutter on the face cover when
trimming threads.
• Use fine threads #60 or larger number for the twin
needle sewing.
Buttonholes and specialty stitches such as darning or
eyelet, and monogram cannot be selected.
w Twin needle key
e Twin needle icon
r Maximum width (3.0)
Select the desired pattern suitable for twin needle
sewing.
Press the twin needle key.
The LCD screen shows a twin needle icon and the
maximum permissible stitch width is restricted to 3.0 mm.
The needle drop position of straight stitches is restricted
to between 2.0 and 5.0.
After twin needle sewing is finished, press the twin
needle key. The twin needle icon blinks.
Replace the twin needle with a single needle.
Turn off and on the power switch or press the twin needle
key to return to the single stitch mode.
64