Touch Screen - Kenwood DDX8017 Service Manual

DDX8017/8027/8027Y
DDX8037/8047/8067

Touch Screen

• Touch variances in different sets are adjusted.
Touch the markers for three points in order. When EEPROM
OK screen is displayed, adjustment is complete.
Touch input in progress
First point is being input
Cancel
Third point is being input
Key Specification
Cancel:
The first point is being input. Test Mode Main Screen is dis-
played.
The second point is being input which will move on. Transit
to the first point being input.
EEPROM writing complete OK/NG Screen
Key Specification
Return: Test Mode Main Screen is displayed.
Note: When NG, enter the Test Mode again, and re-do from
the beginning.
38
TEST MODE
Second point is being input
Return
Write OK/NG
Hposi Screen
• Horizontal position for each screen is adjusted.
Hposi Adjustment screen
Next
Adjustment item
< <
step value
Adjustment item
< <
step value
Cancel
Key Specification
Next: To next Hposi adjustment screen. When in NAVI
screen, EEPROM writing will begin.
<< : The screen moves to the left.
>> : The screen moves to the right.
Cancel: Test Mode Main Screen is displayed.
Note:The key arrangements are somewhat different with
OSD model and Graphic model. (With the Graphic model,
one adjustment item per one screen.)
Note: There is no need for the upper column (Graphic) of
the first adjustment screen of the OSD model to be adjusted.
EEPROM writing compete OK/NG Screen
Hposi OK/NG
Key Specification
Return: Test Mode Main Screen is displayed.
Note: In case of NG, enter the Test Mode again and re-do
from the beginning.
Note: The key arrangements are somewhat different with
OSD model and Graphic model.
> >
> >
Return