Setup Function; Setup Menu Screen; Selecting The Touch Panel Adjustment Screen; Selecting The Av Setup Screen - Kenwood KVT-M700 Instruction Manual

Setup Function

Setup Menu Screen

M E N U
S O U N D S E T U P
T O U C H
C L O C K
C O D E
S O U R C E

Selecting the Touch Panel Adjustment Screen

The touch panel can be adjusted if the position
touched and the operation performed do not match.
Touch the [TOUCH] button.
(☛ Page 10)

Selecting the AV Setup Screen

Touch the [AV I/F] button.
(☛ Page 11)

Selecting the Clock Adjustment Screen

Touch the [CLOCK] button.
(☛ Page 9)

Selecting the System Setup Screen

Touch the [SYSTEM] button.
(☛ Page 12)

Selecting the Code Security Screen

Press the [CODE] button for at least 2 seconds.
(☛ Page 10)
1 2 : 0 0
T U N E R
A V I / F
S Y S T E M S Y S T E M

Clock Adjustment Screen

C L O C K
1 2 : 0 0
S Y N C
O N
C L O C K A D J U S T

Synchronize Clock [SYNC]

Synchronizing the RDS station time data and this
unit's clock.
Touch Setting
[7ON] Synchronizes the time.
[7OFF] Adjust the time manually.
It takes 3 to 4 minutes to synchronize the clock.

Manual Clock Adjustment [CLOCK]

To advance the hours.
C L O C K
To make the hours go
back.
Setting the Minutes to "00":
Touch the [RESET] button.
• Touch the [RESET] button while the minute is below "30"
rounds it off, and while the minute is "30" or more rounds it
up.
• This adjustment can be done when the <SYNC> is set as
OFF.

Exit the Clock Adjustment Screen

Touch the [RTN] button.
Return to the setup menu screen.
R E S E T
O F F
RTN
To advance the
minutes.
1 2 : 0 0
To make the minutes
go back.
9