Advertisement
Inserting the Battery Into the
Trimmer
1. Align the tongue of the battery pack with the cavity in
the handle housing (Figure 4).
1. Trigger handle
2. Tongue
2. Grasp the trigger handle (Figure 4).
3. Push the battery pack into the handle until the latch
locks into place.
Important: The battery pack is not fully charged when
it is purchased. Before using the trimmer for the first
time, place the battery pack in the charger and charge it
until the LED display indicates the battery is charged.
Make sure to read all safety precautions. With regular
use, it will need shorter charging time. If storing for 1
month or longer, remove the battery and use storage
mode ( (page )). When ready to use again, charge the
battery pack until the LED display indicates the battery
is charged.
Battery Pack Preparation For
Recycling
WARNING
Upon removal, cover the battery pack's terminals
with heavy-duty adhesive tape. Do not attempt to
destroy or disassemble the battery pack or remove
any of its components. Lithium-ion batteries must
be recycled or disposed of properly at the nearest
battery recycling facility.
Troubleshooting
Using the battery when it is hot can reduce the operating
time. The battery will automatically stop working when it
is overheated to prevent damage to it. Remove the battery
from the charger and allow it to cool before placing it back
into the trimmer.
Using the battery when there is moisture on the leads can
cause the trimmer to malfunction. Allow the battery to dry or
wipe it dry before placing it back into the trimmer.
Figure 4
3. Latch
5
Advertisement
