Advertisement
Figure 2
1. LED indicators (level of
charge)
2. Release button
3. Slide the battery into the charger until it clicks into
place.
4. To remove the battery, press down on the release
button and slide the battery backwards out of the
charger.
5. Refer to Figure 3 to interpret the LED indicators on
the battery charger.
3. Battery terminal
4. Test button
1. Red light on; green
light flashing—battery is
charging.
2. Red light on; green
light on—battery is fully
charged.
3. Red light flashing; green
light off—abnormal battery
temperature (greater than
50 C (122 F) or less than 0
C (32 F).
4. Charge/storage mode
switch
Storing a lithium-ion battery at 40% of its capacity maximizes
battery life.
Use storage mode (Figure 3) when the battery will not be
used for 1 month or longer.
1. Insert the battery into the charger.
2. Turn storage mode on.
3. The battery will charge or discharge as necessary to
approximately 40% charge.
4. When the battery is ready for storage (Figure 3),
remove the battery from the charger.
4
Figure 3
5. Red light off; green
light flashing—battery is
preparing for storage.
6.
Red light off; green light
on—battery is prepared
for storage.
7. Red light on; green light
off—no battery inserted.
8. Red light flashing; green
light flashing—battery is
defective.
Advertisement
